Diese Seite wurde mit Google Übersetzer übersetzt
Gerätespezifikationsbibliothek
Grundlegende Modellinformationen
-
Hersteller:HammerHead
-
Modell:HB3038
Hersteller anzeigen Modelle anzeigen
Zusätzliche Information
The HB3038 system is highly efficient, simple to set up, easy to operate and leaves a small foot print for the down hole unit. HB3038 systems are fast, a typical 400' (122 m) job takes only a two hour round trip from payout to completion.
HB3038 machines feature quick replacement jaw inserts, on
board pressure gauges and an auto rod grip and release feature. All HammerHead static pipe bursting systems feature torqued joint rods that have been proven in oil field and directional drilling for decades under
thrust, pullback and bend radii conditions.
DOWN HOLE UNIT AND RODS
Pipe Replacement Range - in (mm): 2 - 6 (50 - 150)
Rig Size L/W/H - in (cm): 60/20/12 (152/51/30)
Minimum Pit Size L/W/H - in (cm):
80/20/7 below pipe center line
(213/51/18 below pipe center line)
Weight - lb (kg): 762 (345)
Max. Pulling Force: 38 tons
Shuttle speed (no load, one cycle, aprox 1 m rod):
18 seconds
Rod Diameters - in (cm):
a. 1.38" (35 mm)
b. 1.75" (45 mm)
Rod Lengths - in (cm):
a. 39.38 (100 )
b. 39.38 (100)
Rod Weights - lb (kg):
a. 17.2 (7.8)
b. 27 (12.2)
SPECIFICATIONS - HYDRAULIC POWER PACK
Engine: Kubota 20.3 HP (15.1 kw) @ 2,800 RPM
Pump Flow - gpm (L/min): 24 (91) @ 2,800 RPM
Max. Hydraulic Pressure - psi (bar): 3,000 (207)
Rig Size L/W/H - in (cm): 52.5/23.5/41.5 (133/60/105)
Weight - lb (kg): 690 (313)
HB3038 machines feature quick replacement jaw inserts, on
board pressure gauges and an auto rod grip and release feature. All HammerHead static pipe bursting systems feature torqued joint rods that have been proven in oil field and directional drilling for decades under
thrust, pullback and bend radii conditions.
DOWN HOLE UNIT AND RODS
Pipe Replacement Range - in (mm): 2 - 6 (50 - 150)
Rig Size L/W/H - in (cm): 60/20/12 (152/51/30)
Minimum Pit Size L/W/H - in (cm):
80/20/7 below pipe center line
(213/51/18 below pipe center line)
Weight - lb (kg): 762 (345)
Max. Pulling Force: 38 tons
Shuttle speed (no load, one cycle, aprox 1 m rod):
18 seconds
Rod Diameters - in (cm):
a. 1.38" (35 mm)
b. 1.75" (45 mm)
Rod Lengths - in (cm):
a. 39.38 (100 )
b. 39.38 (100)
Rod Weights - lb (kg):
a. 17.2 (7.8)
b. 27 (12.2)
SPECIFICATIONS - HYDRAULIC POWER PACK
Engine: Kubota 20.3 HP (15.1 kw) @ 2,800 RPM
Pump Flow - gpm (L/min): 24 (91) @ 2,800 RPM
Max. Hydraulic Pressure - psi (bar): 3,000 (207)
Rig Size L/W/H - in (cm): 52.5/23.5/41.5 (133/60/105)
Weight - lb (kg): 690 (313)
Diese Information dient nur zu Informationszwecken. HDD Broker LLC kann die Richtigkeit oder Vollständigkeit dieser Informationen nicht garantieren. Diese Informationen können vom Hersteller geändert werden. Einige Spezifikationen können sich je nach Modelljahr unterscheiden.