Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Vermeer
  • Model:
    D750x900
  • Rig Size:
    200,000 lbs pullback and over

View Manufacturers View Models

Specifications

Make and Model (1) CAT C-27
Fuel Tank Capacity 500 gal 1892.71 L
Thrust 784000 lbs 355616.44 kg
Fuel Type Diesel
Hydraulic Tank Capacity 720 gal 2725.5 L
Manufacturer's Gross HP Rating 800 hp 596.56 kw
Max Speed 2000 rpm 2000 rpm
Pullback 784000 lbs 355616.44 kg
Emissions Compliance Tier 2 (EU Stage II) Tier 2 (EU Stage II)
Length 50.5' 15.39 m
Max Carriage Speed 95 ft/min 28.96 m/min
Width 8.5' 2.59 m
Max Spindle Torque 102500 ft-lb 138971.55 Nm
Height 11.5' 3.51 m
Max Spindle Speed 36 rpm
Weight 101,000 lbs 45,812.83 kg
Entry Angle 8 degrees to 12 degrees

Additional Info

-*2010 - 2016*-

DRILL RACK
Length (Minimum Transport): 50.5' (15.4 m)
Width: 8.5' (2.6 m)
Height (Minimum Transport): 11.5' (3.5 m)
Weight: 101000 lbs (45812.8 kg)
Suspension: Triple axle with air ride suspension
Front Base Anchor Length: 20' (6.1 m)
Front Base Anchor Width: 6' (1.8 m)
Front Base Anchor Height: 24" (61 cm)
Front Flat Anchor Length: 9.5' (2.9 m)
Front Flat Anchor Width: 5' (1.5 m)
Front Flat Anchor Height: 8" (20.3 cm)
Rear Base Anchor Length: 16' (4.9 m)
Rear Base Anchor Width: 7.8' (2.4 m)
Rear Base Anchor Height: 8" (20.3 cm)
Number of Rear Legs: 2
Drill Rack Angle: 8 degrees to 12 degrees
Rack Gear Assembly: Double I-beam construction

TRAILER
Triple-axle
Air suspension
11R 24.5 tires / 5-ply tread

DRILLER CABIN
Length: 10' (3.1 m)
Width: 8.5' (2.6 m)
Height: 9' (2.7 m)
Weight: 6000 lbs (2721.6 kg)
Heat and Air Conditioning: In-wall combination unit
Electrical Panel: 110V and 220V
Designed to accommodate operator and steering hand
Large tinted windows for exceptional visibility
Steel tube frame
Finished interior with aluminum-faced sheeting
Operator Console: Controls designed for operator comfort

POWER PACK
Length: 22.4' (6.8 m)
Width: 8' (2.4 m)
Height: 10.3' (3.1 m)
Weight: 38000 lbs (17236.5 kg)
Make and Model: (1) CAT C-27
Fuel Type: Diesel
Fuel Capacity: 500 gal (1892.7 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 800 hp (596.6 kw)
EPA Certification Family: Tier 2 (EU Stage II)

POWER PACK OPTION TWO
Length: 32.2' (9.8 m)
Width: 8' (2.4 m)
Height: 10.3' (3.1 m)
Weight: 57260 lbs (25972.7 kg)
Make and Model: (2) CAT C-18
Fuel Type: Diesel
Fuel Capacity: 1000 gal (3785.4 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 1200 hp (894.8 kw)
EPA Certification Family: Tier 3 (EU Stage II)

POWER PACK OPTION THREE
Length: 32.2' (9.8 m)
Width: 8' (2.4 m)
Height: 10.3' (3.1 m)
Weight: 57260 lbs (25972.7 kg)
Make and Model: (2) CAT C-27
Fuel Type: Diesel
Fuel Capacity: 1000 gal (3785.4 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 1600 hp (1193.1 kw)
EPA Certification Family: Tier 2 (EU Stage II)

OPERATIONAL
Thrust: 784000 lbs (3487.4 kN)
Pullback: 784000 lbs (3487.4 kN)
Maximum Spindle Torque: 102500 ft-lb (138971.6 Nm)
Maximum Spindle Torque (Low at Maximum Engine RPM): 102500 ft-lb (138971.6 Nm)
Maximum Spindle Speed at Maximum Engine RPM (with PS800): 36 rpm
Maximum Spindle Speed at Maximum Engine RPM (with PS1200/PS1600): 54 rpm
Maximum Carriage Speed at Maximum Engine RPM: 95 ft/min (29 m/min)
Number of Rotation Motors: 1
Number of Drive Motors: 4
Mud Swivel: 3" (7.6 cm)

LOWER BREAKOUT VISE
Breakout Force: 253000 ft-lb (343022.5 Nm)
Configuration: 3-jaw clamp, 8" (20.3 cm)
Weight: 3800 lbs (1723.7 kg)
Travel: 6' (1.8 m)
Inside Diameter: 9.8" (24.9 cm)
Three-cylinder design
10" (25.4 cm) inside diameter opening
Variably sized vise blocks:
-4.5" (11.4 cm)
-5.5" (14 cm)
-6.6" (16.8 cm)
Replaceable die inserts
Lower vise assembly is detached via two pins and six hydraulic quick disconnects for ease of removal during casing installations

UPPER BREAKOUT VISE
Clamp Force: 250000 ft-lb (338955 Nm)
Configuration: 2-jaw clamp
Inside Diameter: 10" (25.4 cm)
Dual-cylinder design
Integrated into carriage to reduce breakout time
Integrated hydraulically controlled rod alignment arm

SAFETY
Remote Lockout: Yes
Strike Alert: Yes

-*DECEMBER 2015*-

DRILL RACK
Length (Minimum Transport): 50.5' (15.4 m)
Width: 8.5'(2.6 m)
Height (Minimum Transport): 115' (3 5 m)
Weight: 101000 lbs (45812.8 kg)
Suspension: Triple axle with air ride suspension
Front Base Anchor Length: 20' (6.1 m)
Front Base Anchor Width: 6' (1.8 m)
Front Base Anchor Height: 24" (61 cm)
Front Flat Anchor Length: 9.5' (2.9 m)
Front Flat Anchor Width: 5' (1 .5 m)
Front Flat Anchor Height: 8" (20.3 cm)
Rear Base Anchor Length: 16' (4.9 m)
Rear Base Anchor Width: 7.8' (2.4 m)
Rear Base Anchor Height: 8" (20.3 cm)
Number of Rear Legs: 2
Drill Rack Angle: 8 degrees to 12 degrees

DRILLER CABIN
Length: 10'(3.1 m)
Width: 8.5'(2.6 m)
Height: 9' (2.7 m)
Weight: 6000 lbs (2721.6 kg)
Heat and Air Conditioning: In-wall combination unit

POWER PACK
Length: 22.4' (6.8 m)
Width: 8' (2.4 m)
Height: 10.3' (3.1 m)
Weight: 38000 lbs (17236.5 kg)
Make and Model: (1) CAT C-27
Fuel Type: Diesel
Fuel Capacity: 500 gal (1892.7 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 800 hp (596.6 kw)
EPA Certification Family: Tier 2 (EU Stage II)

POWER PACK OPTION TWO
Length: 32.2' (9.8 m)
Width: 8' (2.4 m)
Height: 10.3' (3.1 m)
Weight: 57260 lbs (25972.7 kg)
Make and Model: (2) CAT C-18
Fuel Type: Diesel
Fuel Capacity: 1000 gal (3785.4 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 1200 hp (894.8 kw)
EPA Certification Family: Tier 3 (EU Stage II)

POWER PACK OPTION THREE
Length: 32.2' (9.8 m)
Width: 8' (2.4 m)
Height: 10.3' (3.1 m)
Weight: 57260 lbs (25972.7 kg)
Make and Model: (2) CAT C-27
Fuel Type: Diesel
Fuel Capacity: 1000 gal (3785.4 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 1600 hp (1193.1 kw)
EPA Certification Family: Tier 2 (EU Stage II)

OPERATIONAL
Maximum Spindle Torque: 102500 ft-lb (138971.6 Nm)
Maximum Spindle Torque (Low at Maximum Engine RPM): 102500 ft-lb (138971.6 Nm)
Thrust: 784000 lbs (355616.4 kg)
Pullback: 784000 lbs (355616.4 kg)
Maximum Spindle Speed at Maximum Engine RPM (with PS800): 36 rpm
Maximum Spindle Speed at Maximum Engine RPM (with PS1200/PS1600): 54 rpm
Maximum Carriage Speed at Maximum Engine RPM: 95 ft/min (29 m/min)
Number of Rotation Motors: 1
Number of Drive Motors: 4
Mud Swivel: 3" (7.6 cm)

LOWER BREAKOUT VISE
Breakout Force: 253000 ft-lb (343022.5 Nm)
Configuration: 3-jaw clamp, 8" (20.3 cm)
Weight: 3800 lbs (1723.7 kg)
Travel: 6' (1.8 m)
Inside Diameter: 9.8" (24.9 cm)

UPPER BREAKOUT VISE
Clamp Force: 250000 ft-lb (338955 Nm)
Configuration: 2-jaw clamp
Inside Diameter: 10" (25.4 cm)

SAFETY
Remote Lockout: Yes
Strike Alert: Yes

-*OCTOBER 2015*-

DRILL RACK
Min transport length: 50.3' (15.3 m)
Width: 8.5' (2.6 m)
Min transport height: 11.5' (3.5 m)
Weight: 95,800 lb (43,454.1 kg)
Suspension:Triple axle with air ride suspension
Front base anchor length: 20' (6.1 m)
Front base anchor width: 6' (1.8 m)
Front base anchor height: 38.4" (97.5 cm)
Front small anchor length: 10.5' (3.2 m)
Front small anchor width: 5.5' (1.7 m)
Front small anchor height: 22.8" (57.9 cm)
Rear base anchor length: 16'(4.9 m)
Rear base anchor width: 7.8' (2.4 m)
Rear base anchor height: 15.6" (39.6 cm)
Drill rack angle: 10° - 15° (17.5% - 26.2%)

DRILLER'S CABIN
Length: 11.6' (3.5 m)
Width: 7.9' (2.4 m)
Height: 8' (2.4 m)
Weight: 7800 lb (3538 kg)
Heat and air conditioning: 3 ton (10.6 kW) in-wall combination unit

POWER PACK
Make and model: (1) CAT C-27 ACERT
Fuel type: Diesel
Fuel capacity: 500 gal (1892.7 L)
Hydraulic tank capacity: 720 gal (2725.5 L)
Max engine rpm: 2000 rpm
Gross horsepower: 800 hp (597 kW)
EPA certification family: Tier 2 (EU stage II)

POWER PACK OPTION TWO
Make and model:(2) CAT C-18 ACERT
Fuel type: Diesel
Fuel capacity: 1000 gal (3785.4 L)
Hydraulic tank capacity: 720 gal (2725.5 L)
Maximum engine rpm: 2000 rpm
Gross horsepower: 1200 hp (895 kW)
EPA certification family: Tier 3 (EU Stage II) or Tier 4 Final (EU stage IV)

POWER PACK OPTION THREE
Make and model: (2) CAT C-27 ACERT
Fuel type: Diesel
Fuel capacity: 1000 gal (3785.4 L)
Hydraulic tank capacity: 720 gal (2725.5 L)
Max engine rpm: 2000 rpm
Gross horsepower: 1600 hp (1193 kW)
EPA certification family: Tier 2 (EU Stage II)

OPERATIONAL
Thrust/Pullback: 768,000 lb (3,416.2 kN)
Max spindle torque: 99,400 ft-Ib (134,768.3 Nm)
Max spindle speed at max engine rpm (with PS800): 38 rpm
Max spindle speed at max engine rpm (with PS1200/PS1600): 57 rpm
Max carriage speed at max engine rpm: 91 fpm (27.7 m/min)
Number of rotation motors: 1
Number of drive motors: 4
Mud swivel: 3" (7.6 cm)

LOWER BREAKOUT VISE
Breakout torque: 147,500 ft-lb (199,983.1 Nm)
Configuration: 3-jaw clamp, 8" (20.3 cm)
Weight: 3800 lb (1723.7 kg)
Travel: 6' (1.8 m)
Inside diameter: 10" (25.3 cm)

UPPER BREAKOUT VISE
Clamp force: 176,000 lb (782.8 kN)
Configuration: 2-jaw clamp
Inside diameter: 10" (25.4 cm)

SAFETY
Remote lockout: Yes
Strike alert:Yes

-*MARCH 2015*-

DRILL RACK
Length (Minimum Transport): 50.5' (15.4 m)
Width: 8.5' (2.6 m)
Height (Minimum Transport): 11.5' (3.5 m)
Weight: 101000 lbs (45812.8 kg)
Suspension: Triple axle with air ride suspension
Front Base Anchor Length: 20' (6.1 m)
Front Base Anchor Width: 6' (1.8 m)
Front Base Anchor Height: 24" (61 cm)
Front Flat Anchor Length: 9.5' (2.9 m)
Front Flat Anchor Width: 5' (1.5 m)
Front Flat Anchor Height: 8" (20.3 cm)
Rear Base Anchor Length: 16' (4.9 m)
Rear Base Anchor Width: 7.8' (2.4 m)
Rear Base Anchor Height: 8" (20.3 cm)
Number of Rear Legs: 2
Drill Rack Angle: 8 degrees to 12 degrees

DRILLER CABIN
Length: 10' (3.1 m)
Width: 8.5' (2.6 m)
Height: 9' (2.7 m)
Weight: 6000 lbs (2721.6 kg)
Heat and Air Conditioning: In-wall combination unit

POWER PACK
Length: 22.4' (6.8 m)
Width: 8' (2.4 m)
Height: 10.3' (3.1 m)
Weight: 38000 lbs (17236.5 kg)
Make and Model: (1) CAT C-27
Fuel Type: Diesel
Fuel Capacity: 500 gal (1892.7 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 800 hp (596.6 kw)
EPA Certification Family: Tier 2 (EU Stage II)

POWER PACK OPTION TWO
Length: 32.2' (9.8 m)
Width: 8' (2.4 m)
Height: 10.3' (3.1 m)
Weight: 57260 lbs (25972.7 kg)
Make and Model: (2) CAT C-18
Fuel Type: Diesel
Fuel Capacity: 1000 gal (3785.4 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 1200 hp (894.8 kw)
EPA Certification Family: Tier 3 (EU Stage II)

POWER PACK OPTION THREE
Length: 32.2' (9.8 m)
Width: 8' (2.4 m)
Height: 10.3' (3.1 m)
Weight: 57260 lbs (25972.7 kg)
Make and Model: (2) CAT C-27
Fuel Type: Diesel
Fuel Capacity: 1000 gal (3785.4 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 1600 hp (1193.1 kw)
EPA Certification Family: Tier 2 (EU Stage II)

OPERATIONAL
Maximum Spindle Torque: 102500 ft-lb (138971.6 Nm)
Thrust: 784000 lbs (355616.4 kg)
Pullback: 784000 lbs (355616.4 kg)
Maximum Spindle Speed at Maximum Engine RPM (with PS800): 36 rpm
Maximum Spindle Speed at Maximum Engine RPM (with PS1200/PS1600): 54 rpm
Maximum Carriage Speed at Maximum Engine RPM: 95 ft/min (29 m/min)
Number of Rotation Motors: 1
Number of Drive Motors: 4
Mud Swivel: 3" (7.6 cm)

LOWER BREAKOUT VISE
Breakout Force: 253000 ft-lb (343022.5 Nm)
Configuration: 3-jaw clamp, 8" (20.3 cm)
Weight: 3800 lbs (1723.7 kg)
Travel: 6' (1.8 m)
Inside Diameter: 9.8" (24.9 cm)

UPPER BREAKOUT VISE
Clamp Force: 250000 ft-lb (338955 Nm)
Configuration: 2-jaw clamp
Inside Diameter: 10" (25.4 cm)

SAFETY
Remote Lockout: Yes
Strike Alert: Yes

Engineered for reliability, the field-tested D750x900 is equipped with optimized features for large-diameter drilling. Its penetrating twin Caterpillar C-18 engines produce a maximum of 92,000 ft-lb/125,120 Nm of rotational torque and 750,000 lbs/3,336 kN of thrust/pullback.

Features and Benefits

-Operates efficiently with high-torque, low speed Hagglund hydraulic motors that power the rotary and carriage drives so you can run full torque and full rotary rpm simultaneously.

-Reduces stress on motor because the thrust box bearing-pack assembly is designed to absorb the axial load caused by thrust and pullback.

-Helps prevent rod wrap or wind-up because its floating vice allows the breakout system to clamp the full rod upsets during breakout of the lower and upper joints.

-Muscles through difficult ground formations with higher torque than other models.

-See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x